On average, potting soil needs 11 – 13 lbs of lime per m3 (264 gallons) to increase the pH. After adding the lime it will take a few weeks for the pH to stabilize. If no lime is added, or not enough, high concentrations of elements such as manganese, iron and phosphate will become highly available which may lead to signs of over feeding or toxicity.
The concentration of aluminium can rise to toxic levels for the plant, causing root thickening, which will restrict nutrient uptake. If your potting mix’s pH is too low, the addition of 20 grams of lime (Dolomitic) per 2.65 gallons (10 litres) will raise the pH one point.
The correct degree of acidity for potting mediums is between 5.8 and 6.2; values higher than 6.2 can lead to phosphate depositing out of solution in the form of calcium phosphate, making it less accessible to the plant.
The most reliable way of measuring the nutrients present in the soil is to use the 1:1.5 extraction method, which is used to determine the root environment’s EC and pH. The EC and the pH of the drainage water will vary because soil and soiless mixes are capable of holding back a number of elements while excluding others. It is best to carry out a 1:1.5 analysis after three to five weeks of cultivation. The easiest way to make this analysis is to follow the plan given below step by step:
Previous research into the proportional balance of water and air in CANNA substrates led to CANNA set up practical tests using soiless potting mixes comprised of high quality, porous basic materials. These mixes were compared with the popular soiless potting mixes containing perlite that are available on the market.
In different growing rooms, half of the plants were set in a soiless potting mix containing perlite and the other half was set in the airier mix. Climate and feeding was identical for all plants. After three weeks clear differences could be seen. The plants on the airy mix showed significantly better growth; on average 2 inches more development in length and they had more robust stems. There were fewer limp hanging leaves during the night indicating the plant was receiving sufficient water in the dark, a prerequisite for optimal growth and flowering. The results of these tests show the importance of making abundant air available to the root environment.
A good start is essential in achieving a good harvest. Take extra care to ensure you buy seeds that are suitable for the type of cultivation you have chosen: indoors or outdoors. Germinating your seeds can best be done by following the plan given below step by step.